W16 Dodge® 228011 Taper-Lock Type W/WA Weld-On Hub, 2-1/4 in Bore, 3-1/4 in OD, 2.13 in Bolt Circle Diameter, 1-1/2 in OAL, Steel
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taper bored to receive the taper-lock bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs are available from stock.
-
BrandDodge®
-
UPC782475136810
-
Manufacturer Part Number228011
-
CountryUSA
-
MaterialSteel
-
TypeTaper-Lock Type W/WA
-
Number of Bolt Holes2
-
Bolt Circle Diameter2.13 in
-
Outside Diameter3-1/4 in
-
Bore Diameter2-1/4 in
-
Overall Length1-1/2 in
-
Pilot Diameter2-7/8 in
- Type W/WA taper-lock-rugged, full-length size for single-hub, heavy duty applications
- For use with type 1615 bushing
-
Alternative Part NumberW16
-
UNSPSC31171901
-
Specification Sheet
Recently Viewed
W16 Dodge® 228011 Taper-Lock Type W/WA Weld-On Hub, 2-1/4 in Bore, 3-1/4 in OD, 2.13 in Bolt Circle Diameter, 1-1/2 in OAL, Steel
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taper bored to receive the taper-lock bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs are available from stock.
2-1/4" X 3' WOOD HANDLED LOGGING CANT HOOK - DIX06120 >
A-339-1/4 CROSBY SLING HOOKS
The Crosby model A-339 (1/4") is a forged alloy steel Clevis Sling Hook designed for use with 1/4-inch (7 mm) industrial chain slings. This model is typically categorized under Crosby's Grade 80 / Spectrum 8 lifting components. Note that newer production iterations are often cross-designated or upgraded to the Grade 100 A-1339 or L-1339 series.
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, Delrin® and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
01920 18-volt Cordless Drill Kit With 2-battery Chargers Features 5 Torque Settings & 4-5 Hour Charge Time, 6" Insert Bits, Magnetic Bit Holder & 6" Drill
18-VOLT CORDLESS DRILL KIT WITH 2-BATTERY CHARGERS FEATURES 5 TORQUE SETTINGS & 4-5 HOUR CHARGE TIME, 6" INSERT BITS, MAGNETIC BIT HOLDER & 6" DRILL BITS-FOR01920 >
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
