Browning® 1064294 Single Groove Sheave, QD® Bore, 1/2 to 1-1/4 in Dia Bore, 3.15 in OD, 3.1 in Dia Pitch, 11/16 in W Face
Browning® 1064294 Single Groove Sheave, QD® Bore, 1/2 to 1-1/4 in Dia Bore, 3.15 in OD, 3.1 in Dia Pitch, 11/16 in W Face
-
BrandBrowning®
-
UPC662289363407
-
Manufacturer Part Number1064294
-
CountryUSA
-
Face Width11/16 in
-
Bushing TypeJA
-
Pitch Diameter3.1 in
-
MaterialCast Iron
-
Hub Projection0.42375 in
-
Outside Diameter3.15 in
-
Bore Diameter1/2 to 1-1/4 in
-
Bore TypeQD®
-
Overall Length1.11125 in
-
Suitable For Use With3V-Cross Section V-Belts
- Close grain cast iron allows Browning® to machine our sheaves to the closest tolerances possible
- Precision balanced
- Easy-on/easy-off
- QD® bushings can be reverse mounted
-
Alternative Part Number13V315JA
-
UNSPSC24101610
-
Package Description1/PK
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® 1064294 Single Groove Sheave, QD® Bore, 1/2 to 1-1/4 in Dia Bore, 3.15 in OD, 3.1 in Dia Pitch, 11/16 in W Face
Browning® 1064294 Single Groove Sheave, QD® Bore, 1/2 to 1-1/4 in Dia Bore, 3.15 in OD, 3.1 in Dia Pitch, 11/16 in W Face
GARVIN® LT75 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated
1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
Starrett® 95419-100 Band Saw Blade Coil Stock, 3/4 in W x 0.032 in THK, 100 ft L Coil, Carbide Tooth
100 Ft. Coil, Advanz™ CG Carbide Grit Band Saw Blade Material - 3/4" width, .032" thickness, Continuous edge, Carbide Medium Grit. Made with a tungsten carbide grit bonded to an alloy back. Cuts through many hard or abrasive materials that conventional tooth blades won't cut.
Morse® QuikSilver® ZHBDR14-100 Band Saw Blade Coil Stock, 1/2 in W x 1/4 in THK, 14 TPI, 100 ft L Coil, Carbon Steel Tooth
Morse® QuikSilver® ZHBDR14-100 Band Saw Blade Coil Stock, 1/2 in W x 1/4 in THK, 14 TPI, 100 ft L Coil, Carbon Steel Tooth
Morse® Matrix II 393413100C Band Saw Blade Coil Stock, 1/2 in W x 0.02 in THK, 10/14 TPI, 100 ft L Coil, HSS Tooth
Morse® Matrix II 393413100C Band Saw Blade Coil Stock, 1/2 in W x 0.02 in THK, 10/14 TPI, 100 ft L Coil, HSS Tooth
