Browning® Classical Gripbelt® 1028349 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 4.45 in OD, 3.9 in (A)/4.4 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028349 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 4.45 in OD, 3.9 in (A)/4.4 in (B) Dia Pitch, 7/8 in W Face
-
BrandBrowning®
-
UPC662289168040
-
Manufacturer Part Number1028349
-
CountryUSA
-
Face Width7/8 in
-
Pitch Diameter3.9 in (A)/4.4 in (B)
-
MaterialCast Iron
-
TypeType 2
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter4.45 in
-
Bore Diameter7/8 in
-
Bore TypeFinished
-
Overall Length1-9/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberBK47X7/8
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1028349 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 4.45 in OD, 3.9 in (A)/4.4 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028349 BK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 4.45 in OD, 3.9 in (A)/4.4 in (B) Dia Pitch, 7/8 in W Face
HCI Preferred Supplier 28115 Hex Head Bushing, 1 x 3/4 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28115 Hex Head Bushing, 1 x 3/4 in Nominal, MNPT x FNPT End Style, Brass
Speakman® SE-495 Traditional Eye/Face Wash, Wall Mount, ANSI/ISEA Z358.1
Speakman® traditional series round bowl eye/face wash stations provide the highest level of performance. All traditional series eye/face wash stations feature dual spray heads with automatic flow controls and flip top dust covers. The aerated water flow, a Speakman® signature feature allows soft flowing water to provide a wider coverage, cleaning full facial areas. Additionally traditional eye/face wash stations are equipped with a stay open ball valve activated by a paddle handle allowing hands free operation once the eye/face wash has been activated. The Speakman® Traditional Series SE-495 Eye and Face Wash Plastic Bowl Wall Mount System is a wall mounted unit with a yellow plastic bowl meets the ANSI/ISEA Z385.1 standard and OSHA compliance.
Gates® Power Transmission PowerGrip® 480H100 Heavy Timing Belt, 1 in W, 48 in OAL, 1/2 in Pitch, 96 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
50:1 GEAR REDUCER -BRW175UH50 >
HCI Preferred Supplier 44255LF Imperial Pipe Tee, 1 in Nominal, FNPT x FNPT x FNPT End Style, Bronze
HCI Preferred Supplier 44255LF Imperial Pipe Tee, 1 in Nominal, FNPT x FNPT x FNPT End Style, Bronze
