Browning® Classical Gripbelt® 1026434 AK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 3.95 in OD, 3.9 in (A)/3.36 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1026434 AK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 3.95 in OD, 3.9 in (A)/3.36 in (3L) Dia Pitch, 3/4 in W Face
-
BrandBrowning®
-
UPC662289315024
-
Manufacturer Part Number1026434
-
CountryUSA
-
Face Width3/4 in
-
Pitch Diameter3.9 in (A)/3.36 in (3L)
-
MaterialCast Iron
-
TypeType 2
-
SeriesAK Series
-
Hub Projection15/32 in
-
Outside Diameter3.95 in
-
Bore Diameter7/8 in
-
Bore TypeFinished
-
Overall Length1-7/32 in
-
Suitable For Use With4L/A and 3L Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Wrapped construction - Browning offers a full line of wrapped FHP Belts which provides smooth quiet operation
- Wrapped FHP Belts are more tolerant to slipping and misalignment than Raw Edge Belts
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberAK41X7/8
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1026434 AK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 3.95 in OD, 3.9 in (A)/3.36 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1026434 AK Series Type 2 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 3.95 in OD, 3.9 in (A)/3.36 in (3L) Dia Pitch, 3/4 in W Face
10" X 18" X 1" AIR FILTER - GLATA10181 >
Drillco 445E140 4450E Imperial Hand Reamer, 5/8 in Dia x 7 in OAL, Square Shank, Spiral Flute
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry.
Gates® Power Transmission PowerGrip® 330H100 Heavy Timing Belt, 1 in W, 33 in OAL, 1/2 in Pitch, 66 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
24X24X1" PLEATED AIR FILTER
20" X 25" X 2" PLEATED AIR FILTER
