Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
-
BrandBrowning®
-
UPC662289277674
-
Manufacturer Part Number1027911
-
CountryUSA
-
Face Width13/16 in
-
Pitch Diameter2.2 in (A)/2.7 in (B)
-
MaterialCast Iron
-
TypeType 2
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter2.7 in
-
Bore Diameter5/8 in
-
Bore TypeFinished
-
Overall Length1-7/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberBK27X5/8
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
HCI Preferred Supplier 36184 Ball Check Grease Fitting, M10x1 Thread, 18 mm OAL, Steel
HCI Preferred Supplier 36184 Ball Check Grease Fitting, M10x1 Thread, 18 mm OAL, Steel
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Browning® Classical Gripbelt® 1026368 AK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3-3/4 in OD, 3.7 in (A)/3.16 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1026368 AK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3-3/4 in OD, 3.7 in (A)/3.16 in (3L) Dia Pitch, 3/4 in W Face
Gates® Power Transmission PowerGrip® 450XL037 Extra Light Timing Belt, 3/8 in W, 45 in OAL, 0.2 in Pitch, 225 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
HCI Preferred Supplier 25032424 Hydraulic Elbow, 1-7/8-12 x 1-1/2 in Nominal, 37 deg SAE Male JIC Flare, Steel
HCI Preferred Supplier 25032424 Hydraulic Elbow, 1-7/8-12 x 1-1/2 in Nominal, 37 deg SAE Male JIC Flare, Steel
