Browning 3/4"-ID A OR B-BELT SHEAVES BRW BK-32 X 3/4
Browning® Classical Gripbelt® 1028059 BK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3.35 in OD, 2.8 in (A)/3.3 in (B) Dia Pitch, 13/16 in W Face
-
BrandBrowning®
-
UPC662289177721
-
Manufacturer Part Number1028059
-
CountryUSA
-
Face Width13/16 in
-
Pitch Diameter2.8 in (A)/3.3 in (B)
-
MaterialCast Iron
-
TypeType 2
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter3.35 in
-
Bore Diameter3/4 in
-
Bore TypeFinished
-
Overall Length1-7/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Precision balanced to provide smooth, vibration free performance
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Wrapped construction - Browning offers a full line of wrapped FHP Belts which provides smooth quiet operation
- Wrapped FHP Belts are more tolerant to slipping and misalignment than Raw Edge Belts
-
Alternative Part NumberBK32X3/4
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1028059 BK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3.35 in OD, 2.8 in (A)/3.3 in (B) Dia Pitch, 13/16 in W Face
FYH® UCFC206 19 UCFC Round Flange Cartridge Unit, 1-3/16 in Dia Bore, 4-29/32 in OD, 1.5 in W, Cast Iron Bearing
FYH® UCFC206 19 UCFC Round Flange Cartridge Unit, 1-3/16 in Dia Bore, 4-29/32 in OD, 1.5 in W, Cast Iron Bearing
Jet® JLP-A mini pullers are designed with safety and durability to operate in light duty industrial applications. The all steel construction dual pawl weston style brake system and grade 80 load chain provide proven safety and reliability. Easily maintained and serviced, the JET®JLP-A mini puller is available in 1/4 ton and 1/2 ton capacities with standard lifts of 5, 10 and 15 feet (custom lifts available). The Jet® JLP-A mini puller is designed to work in tight spaces and low headroom applications.
Gates® Power Transmission 16MP-12MP SAE to SAE Hydraulic Flange Adapter, 1-11-1/2 x 3/4-14 Nominal, Male NPTF End Style, Steel
Gates® Power Transmission 16MP-12MP SAE to SAE Hydraulic Flange Adapter, 1-11-1/2 x 3/4-14 Nominal, Male NPTF End Style, Steel
Dixon® DCP25 Air Chief Industrial Quick Connect Plug, 3/8-18 Nominal, Quick Disconnect Plug x Male NPTF, 300 psi Pressure, Steel, Domestic
Dixon® DCP25 Air Chief Industrial Quick Connect Plug, 3/8-18 Nominal, Quick Disconnect Plug x Male NPTF, 300 psi Pressure, Steel, Domestic
Gates® Power Transmission PowerGrip® 88MXL012 Mini Extra Light Timing Belt, 1/8 in W, 8.8 in OAL, 0.08 in Pitch, 110 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
