Browning 1-GRV 1"-ID A OR B-BELT SHEAVES BRW BK-60 X 1
Browning® Classical Gripbelt® 1028695 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5-3/4 in OD, 5.2 in (A)/5.7 in (B) Dia Pitch, 7/8 in W Face
-
BrandBrowning®
-
UPC662289158263
-
Manufacturer Part Number1028695
-
CountryUSA
-
Face Width7/8 in
-
Pitch Diameter5.2 in (A)/5.7 in (B)
-
MaterialCast Iron
-
TypeType 3
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter5-3/4 in
-
Bore Diameter1 in
-
Bore TypeFinished
-
Overall Length1-9/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Precision balanced to provide smooth, vibration free performance
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- One and two Groove product are available in 1.6 in to 8.5 in covering up to 25 horsepower
- VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore
- The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with
- When discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed
-
Alternative Part NumberBK60X1
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1028695 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5-3/4 in OD, 5.2 in (A)/5.7 in (B) Dia Pitch, 7/8 in W Face
3-LB RUSTOLEUM AMBER SHELLAC READY TO USE, DRIES FAST TO A HARD CLEAR FILM-JWH783913 >
Jet® JLP-A series lever hoists combine safety, reliability and durability that are designed to perform in light duty industrial applications. Safety features such as optional overload protection prevents the lever hoist from lifting or pulling damaging loads above its rated capacity. Jet® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading. The Jet® JLP-A lever hoist is available in 1/4 ton to 6 ton capacities with standard lifts of 5, 10, 15, 20 and 30 ft (custom lifts available). The Jet® JLP-A is the perfect choice for a contractor grade lever hoist.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Gates® Power Transmission PowerGrip® 154L100 Light Timing Belt, 1 in W, 15.38 in OAL, 3/8 in Pitch, 41 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
F4B-SCM-107 Dodge® 126187 208 Medium Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 4 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.13 in OAL/Dia
F4B-SCM-107 Dodge® 126187 208 Medium Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 4 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.13 in OAL/Dia
