Browning® Classical Gripbelt® 1028117 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028117 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
-
BrandBrowning®
-
UPC662289167814
-
Manufacturer Part Number1028117
-
CountryUSA
-
Face Width7/8 in
-
Pitch Diameter3 in (A)/3-1/2 in (B)
-
MaterialCast Iron
-
TypeType 2
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter3.55 in
-
Bore Diameter1 in
-
Bore TypeFinished
-
Overall Length1-9/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Precision balanced to provide smooth, vibration free performance
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberBK34X1
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1028117 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028117 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028489 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 4.95 in OD, 4.4 in (A)/4.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028489 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 4.95 in OD, 4.4 in (A)/4.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028232 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.95 in OD, 3.4 in (A)/3.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028232 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.95 in OD, 3.4 in (A)/3.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028778 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028778 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
IDC Select® IDC AK054-15/16 Light Duty Type 3 Single Groove Sheave With 1/4 x 1/8 in Keyway and Setscrew, Bored to Size Bore, 15/16 in Dia Bore, 5-1/4 in OD, 5 in Dia Pitch, 3/4 in W Face
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
MasterDrive BK32-3/4 BK Series Type-2 Groove Sheave, Finished Bore, 0.75 in Dia Bore, 3.35 in Dia Outside, 2.6 in (A/4L)/3 in (B/5L) Dia Pitch, 0.812 in W Face
Light Duty Fractional Horsepower (FHP) Sheaves are accurately machined from cast gray iron for strength and durability. They are statically balanced, and powder coated (painted) with a smooth attractive finish. BK sheaves are designed for use "B" belts, "4L" belts, as well as "A" belts & "5L" belts. They are common in many belt driven industrial power transmission applications, and most often utilized in HVAC equipment.
