Browning® 1062546 Type 13 Arm Multiple Sheave, 1.13 to 3.75 in Split Taper Bore, 21.2 in OD, 3 Grooves, 21.1 in Dia Pitch, 2-3/8 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
-
BrandBrowning®
-
UPC662289312139
-
Manufacturer Part Number1062546
-
CountryUSA
-
Face Width2-3/8 in
-
Bushing TypeR1
-
Pitch Diameter21.1 in
-
MaterialCast Iron
-
TypeType 13 Arm
-
Number of Grooves3
-
Outside Diameter21.2 in
-
Bore Diameter1.13 to 3.75 in
-
Bore TypeSplit Taper
-
Overall Length3-11/32 in
-
Suitable For Use WithGripBelt® 5V Cross Section V-Belt
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
-
Alternative Part Number3R5V212
-
UNSPSC26111806
-
Package DescriptionEACH
-
Standards/ApprovalsABMA/AGMA/AIST/AWEA/CEMA/GEAPS/MPTA/NSSGA/PTDA Standards
-
Warranty1 Year
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Browning® 1062546 Type 13 Arm Multiple Sheave, 1.13 to 3.75 in Split Taper Bore, 21.2 in OD, 3 Grooves, 21.1 in Dia Pitch, 2-3/8 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
FYH® EAFL206 20 EAFL Normal Duty Flange Mount Ball Bearing Unit, 4-Bolt Flange Flange Mount
FYH® EAFL206 20 EAFL Normal Duty Flange Mount Ball Bearing Unit, 4-Bolt Flange Flange Mount
The MILWAUKEE® M18™ FORCE LOGIC™ Single Channel Strut Shear is the Most Productive Way to Shear Strut on the jobsite. Utilizing Milwaukee® proprietary Shearing Dies, the Strut Shear delivers square, clean shears without additional filing or deburring. The integrated strut support plate offers a quick 4in/10cm measurement offset for simple, repeatable shears increasing productivity on site. The Strut Shear’s dual die design eliminates exposed blades and reduces the chance of cut and laceration injuries on jobsites. This highly portable Strut Shear offers unmatched versatility allowing you to easily shear on any flat surface or chain vice at the point of installation around the jobsite. The integrated tri-stand chain vice mount allows seamless integration into any brand chain vice to keep users productive. Featuring Milwaukee® ONE-KEY™ Technology, view tool usage, receive notifications for recommended maintenance, and lock the tool out for added security to protect your investment. The kit includes (1) 1-5/8” x 1-5/8” Single Channel Shearing Dies, (1) M18™ XC 5.0 REDLITHIUM™ Battery, M18™ and M12™ Multi-Voltage Charger and a soft-sided carrying bag with pockets that can accommodate (3) additional Shearing Die Sets. Additional Accessory Dies available: 13/16” x 1-5/8” Dies (49-16-1316), 7/8” x 1-5/8” Dies (49-16-0078), Combination 13/16” & 1-5/8” Dies (49-16-1513), and Combination 7/8” & 1-5/8” Dies (49-16-1578).
Gates® Power Transmission Micro-V® 560L24 Heavy Duty V-Belt, L Section, 3/16 in W Top, 56 in L Outside, 1/4 in THK, Polychloroprene Rubber
Our exclusive truncated profile gives Gates® Micro-V® L-Section belts increased flexibility and resistance to heat buildup, enabling better performance at higher speeds on smaller diameter sheaves. This makes Gates® Micro-V® belts an ideal choice for applications where space is at a premium, such as appliances, roller conveyors, machine tools and medical equipment.
Prier® 630-7965 Complete Replacement Handle Kit, For Use With Mansfield® 300, 400 and 500 Series Wall Hydrant, Plastic/Stainless Steel, Domestic
Prier® 630-7965 Complete Replacement Handle Kit, For Use With Mansfield® 300, 400 and 500 Series Wall Hydrant, Plastic/Stainless Steel, Domestic
Gates® Power Transmission Micro-V® 380J8 Heavy Duty V-Belt, J Section, 3/32 in W Top, 38 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
