Browning® 1060177 Type H-4 Multiple Sheave, 0.38 to 1.5 in Split Taper Bore, 5 in OD, 2 Grooves, 4.95 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
-
BrandBrowning®
-
UPC662289109531
-
Manufacturer Part Number1060177
-
CountryUSA
-
Face Width1-3/32 in
-
Bushing TypeH
-
Pitch Diameter4.95 in
-
MaterialCast Iron
-
TypeType H-4
-
Number of Grooves2
-
Outside Diameter5 in
-
Bore Diameter0.38 to 1.5 in
-
Bore TypeSplit Taper
-
Overall Length1-1/2 in
-
Suitable For Use WithGripBelt® 3V Cross Section V-Belt
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part Number2H3V50
-
UNSPSC26111806
-
Package DescriptionEACH
-
Standards/ApprovalsABMA/AGMA/AIST/AWEA/CEMA/GEAPS/MPTA/NSSGA/PTDA Standards
-
Warranty1 Year
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Browning® 1060177 Type H-4 Multiple Sheave, 0.38 to 1.5 in Split Taper Bore, 5 in OD, 2 Grooves, 4.95 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
MCR Safety PA112AF Plasma® Lightweight Safety Glasses, Duramass® Anti-Fog, Gray Lens, Wrap Around Frame, Black, Polycarbonate Frame, ANSI Z87+
Dodge® 123818 210 Normal Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.12 in OAL x 4.53 in OAH
Dodge® 123818 210 Normal Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.12 in OAL x 4.53 in OAH
Gates® Power Transmission Hi-Power® II PowerBand® 2/B87 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 90 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
20" X 80" LINK PANEL-AAF523693308>
HPG-2212-DPB COILHOSE PNEUMATICS Pressure Range: 20 to 120 PSI (calibrated for heavy-duty or standard service use).Chuck Type: Dual-foot design, allowing you to easily reach inner dual wheel valves on trucks and trailers.Body Style: Slim, compact pocket-
Pressure Range: 20 to 120 PSI (calibrated for heavy-duty or standard service use). Chuck Type: Dual-foot design, allowing you to easily reach inner dual wheel valves on trucks and trailers. Body Style: Slim, compact pocket-pencil profile with a pocket clip. Suffix Meaning: The "DPB" typically denotes the specific commercial packaging, such as a display pack or bulk pack configuration for retail and industrial supply distributors.
