Dodge® 111005 Type A1 Sheave, 1/2 to 2-11/16 in Taper-Lock® Bore, 9 in OD, 3 Grooves, 8.9 in Dia Pitch, 2.38 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
-
BrandDodge®
-
UPC782475084975
-
Manufacturer Part Number111005
-
CountryUSA
-
Face Width2.38 in
-
Bushing Type2517
-
Pitch Diameter8.9 in
-
FinishGray
-
MaterialCast Iron
-
TypeType A1
-
Number of Grooves3
-
Outside Diameter9 in
-
Bore Diameter1/2 to 2-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With5V-Cross Section V-Belts
- Isolates shock loads and vibration
- Minor misalignment capability
- Drive ratios of 6:1 or more possible
- Low maintenance
- No lubrication required
- Typically 95% efficiency can be obtained
-
Alternative Part Number3-5V9.0-2517
-
UNSPSC31171804
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Catalog
-
Line Drawing
-
Specification Sheet
Recently Viewed
Dodge® 111005 Type A1 Sheave, 1/2 to 2-11/16 in Taper-Lock® Bore, 9 in OD, 3 Grooves, 8.9 in Dia Pitch, 2.38 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
Gates® Power Transmission MegaCrimp™ 16MJ-16MP G60 SAE to SAE Straight Adapter, 1-5/16-12 x 1-11-1/2 Nominal, 37 deg Male JIC Flare x Male NPTF, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
Penn-Union™ ST-36-BG Standard Female Crimp Terminal, 12 to 10 AWG Conductor, 0.32 in L x 0.25 in W Tab, Copper, Yellow, Insulated
Penn-Union™ ST-36-BG Standard Female Crimp Terminal, 12 to 10 AWG Conductor, 0.32 in L x 0.25 in W Tab, Copper, Yellow, Insulated
Browning® 767324 VF4E 100 Intermediate Duty Non-Expansion Round/Straight Bore Flange Mount Ball Bearing Unit, 1-15/16 in Dia Bore, 4-3/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 5-5/8 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Gates® Power Transmission MegaCrimp™ 16MB-16MJ G60 SAE to SAE Straight Adapter, 1-5/16-12 Nominal, Male O-Ring Boss™ x 37 deg Male JIC Flare, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
