3B4.61610 Dodge® 118235 Type A1 Sheave, 1/2 to 1-11/16 in Taper-Lock® Bore, 4.95 in OD, 3 Grooves, 4.58/4.96 in Dia Pitch, 2-1/2 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
-
BrandDodge®
-
UPC782475095315
-
Manufacturer Part Number118235
-
CountryUSA
-
Face Width2-1/2 in
-
Bushing Type1610
-
Pitch Diameter4.58/4.96 in
-
MaterialCast Iron
-
TypeType A1
-
Number of Grooves3
-
Outside Diameter4.95 in
-
Bore Diameter1/2 to 1-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use WithAB Cross Section V-Belts
- Isolates shock loads and vibration
- Minor misalignment capability
- Drive ratios of 6:1 or more possible
- Low maintenance
- No lubrication required
- Quiet operation
- Typically 95% efficiency can be obtained
-
Alternative Part Number3B4.6-1610
-
UNSPSC31171804
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Line Drawing
-
Specification Sheet
Recently Viewed
3B4.61610 Dodge® 118235 Type A1 Sheave, 1/2 to 1-11/16 in Taper-Lock® Bore, 4.95 in OD, 3 Grooves, 4.58/4.96 in Dia Pitch, 2-1/2 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
1-PT CONCENTRATE LIQUID SEVIN-JWH758228 >
BRASS GAS FITTING 3/8" OD TUBEX3/8" -MALE IPS-JWH414938 >
Justrite® 09308 Foot Operated Oily Waste Can With Self-Closing SoundGard™ Cover, 10 gal Capacity, 13.938 in Dia x 18-1/4 in H, Steel, Red
Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. SoundGard™ oily waste cans include a sound muffling pad inside lid to reduce lid-closure noise by nearly 200% over standard models. Ideal for laboratories or anywhere it is desirable to lessen disruptive noise. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For safely disposing oily rags and prevent fire hazards in industries like automotive and manufacturing.
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
3/8" YELLOW 300-PSI AIR HOSE (FT)-SPIK123106R >
