Browning® Gearbelt® 1055409 Type 2 Synchronous Timing Pulley With Flange, 5/8 to 7/8 in Bore, 2.174 in OD, 14 Grooves, 2.228 in Dia Pitch, 1-1/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
-
BrandBrowning®
-
UPC662289242467
-
Manufacturer Part Number1055409
-
CountryUSA
-
Face Width1-1/4 in
-
Bushing TypeMPB
-
Pitch1/2 in
-
Pitch Diameter2.228 in
-
Flange Diameter2-7/16 in
-
TypeType 2
-
Hub Diameter1-5/8 in
-
Hub Projection5/8 in
-
Number of Grooves14
-
Outside Diameter2.174 in
-
Bore Diameter5/8 to 7/8 in
-
Overall Length1-7/8 in
-
Suitable For Use With1 in W H100 Type Belt
- Constant Speed - No slip, no creep, minimum backlash due to the positive engagement of the belt teeth with the grooves of the sprockets
- Broad depth of product to choose from - Browning offers 5 different sprocket pitches along with a wide range of sprocket and belt widths to accommodate any horsepower requirement
- Different Mounting to the shaft - Browning offers the Gearbelt Pulleys in various ways to mount to the shaft, Split Taper and QD Bushing styles, as well as, finished and minimum plain bore
- Lightweight, high horsepower-to-weight ratio makes Gearbelt® drives ideal for any application where weight is an important factor
- Less heat, because Gearbelt® drives generate virtually no friction
- No lubrication required
- Wide load capacity range
- Constant Speed - No slip, no creep, minimum backlash due to the positive engagement of the belt teeth with the grooves of the sprockets
- Different Mounting to the shaft - Browning offers the Gearbelt Pulleys in various ways to mount to the shaft, Split Taper and QD Bushing styles, as well as, finished and minimum plain bore
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub
- Combination Groove - All Browning B Sheaves permit the running of A and B Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Broad depth of product to choose from - Browning offers 5 different sprocket pitches along with a wide range of sprocket and belt widths to accommodate any horsepower requirement
-
Alternative Part Number14HB100
-
UNSPSC26111807
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® Gearbelt® 1055409 Type 2 Synchronous Timing Pulley With Flange, 5/8 to 7/8 in Bore, 2.174 in OD, 14 Grooves, 2.228 in Dia Pitch, 1-1/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Gearbelt® 1054659 Type 1 Synchronous Timing Pulley With Flange, 5/8 in Finished Bore, 1.88 in OD, 16 Grooves, 1.91 in Dia Pitch, 1 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Proto® J280G Combination Slip Joint Plier, 2-3/8 in L x 1-7/16 in W x 15/32 in THK Forged Alloy Steel Jaw, Serrated Jaw Surface, 9-9/16 in OAL, No, ASME B107.23
Proto® J280G Combination Slip Joint Plier, 2-3/8 in L x 1-7/16 in W x 15/32 in THK Forged Alloy Steel Jaw, Serrated Jaw Surface, 9-9/16 in OAL, No, ASME B107.23
United Abrasives-SAIT 70014 2A Premium Coated Flap Wheel, 1 in Dia, 1 in W Face, 1/4 in Dia Shank, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive
United Abrasives-SAIT 70014 2A Premium Coated Flap Wheel, 1 in Dia, 1 in W Face, 1/4 in Dia Shank, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive
Crescent® CSBFN-740-10 FineCut Saw Blades, 7-1/4 in Dia, 5/8 in Arbor, Steel Blade, 40 Teeth
Crescent's FineCut™ Finishing Blades deliver quality cutting performance for a superior finish over the life of the blade. Premium precision carbide teeth slice through wood with ease delivering 10X life for maximum productivity. An ultra-thin kerf design provides less tear-out, while Active Shield™ non-stick blade coating protects against heat, gumming and corrosion delivering a 40% smoother surface finish for less sanding. Laser cut vibration and expansion slots create a more balanced blade for greater durability and accuracy.
