GatesĀ® Power Transmission 1622V307 Bandless Multi-Speed V-Belt, 1 in W Top, 22 deg Groove, 31.1 in L Outside, Rubber
Multi-speed belts are made banded or bandless construction featuring high-modulus, fiber-loaded stock that offers transverse rigidity and flexibility at the same time. This results in higher load carrying capacity and long belt life.
-
BrandGatesĀ® Power Transmission
-
UPC072053235746
-
Manufacturer Part Number1622V307
-
CountryUSA
-
MaterialRubber
-
Top Width1 in
-
Reinforced MaterialPolyester
-
TypeBandless
-
Groove Angle22 deg
-
Series9804
-
Outside Length31.1 in
- Notch design reduced thermal and bending stresses for longer life
- Smooth running construction for minimal vibration at high speeds
-
Alternative Part Number98040571
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
GatesĀ® Power Transmission 1622V307 Bandless Multi-Speed V-Belt, 1 in W Top, 22 deg Groove, 31.1 in L Outside, Rubber
Multi-speed belts are made banded or bandless construction featuring high-modulus, fiber-loaded stock that offers transverse rigidity and flexibility at the same time. This results in higher load carrying capacity and long belt life.
United Abrasives-SAIT 70103 2A Premium Coated Flap Wheel, 3 in Dia, 1 in W Face, 1/4 in Dia Shank, 180 Grit, Very Fine Grade, Aluminum Oxide Abrasive
United Abrasives-SAIT 70103 2A Premium Coated Flap Wheel, 3 in Dia, 1 in W Face, 1/4 in Dia Shank, 180 Grit, Very Fine Grade, Aluminum Oxide Abrasive
GatesĀ® Power Transmission 4630V650 Banded Multi-Speed V-Belt, 2-7/8 in W Top, 30 deg Groove, 66.1 in L Outside, Rubber
Multi-speed belts are made banded or bandless construction featuring high-modulus, fiber-loaded stock that offers transverse rigidity and flexibility at the same time. This results in higher load carrying capacity and long belt life.
IntertapeĀ® 91405 AC10 Utility Grade Duct Tape, 9.1 m L x 48 mm W, 7 mil THK, Natural Rubber/Resin Adhesive, Polyethylene Film Backing, Silver
ipgĀ® offers a full range of cloth duct tapes to satisfy even the most demanding requirements and industry standards. ipgĀ® duct tapes are made of a polyethylene (PE) outer layer providing waterproof protection, PET cloth middle layer adding strength and tearability and an engineered rubber adhesive layer providing superior holding power. From utility grade to HVAC, all IntertapeĀ® brand tapes are manufactured with high grade raw materials and held to the highest quality standards.
Bando Synchro-LinkĀ® 394L075G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 3/4 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
GatesĀ® Power Transmission 1228V255 Bandless Multi-Speed V-Belt, 3/4 in W Top, 28 deg Groove, 26.1 in L Outside, Rubber
Multi-speed belts are made banded or bandless construction featuring high-modulus, fiber-loaded stock that offers transverse rigidity and flexibility at the same time. This results in higher load carrying capacity and long belt life.
