Gates® Power Transmission Super HC® Molded Notch PowerBand® 12/5VX750 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 75 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053770605
-
Manufacturer Part Number12/5VX750
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness35/64 in
-
MaterialEPDM
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section Size5VX
-
Series9389
-
Number of Ribs12
-
Outside Length75 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number938912075
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 12/5VX750 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 75 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Tigerflex™ WE150x100 WE™ Series Hose With Grounding Wire, 1-1/2 in Nominal, 100 ft L, 50 psi Working, PVC, Domestic
Tigerflex™ WE150x100 WE™ Series Hose With Grounding Wire, 1-1/2 in Nominal, 100 ft L, 50 psi Working, PVC, Domestic
FYH® UCF206-18 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 3-17/64 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
FYH® UCF206-18 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 3-17/64 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
1-1/4" X 3" LIFTING EYES (EYE BOLT) SHOULDER PATTERN-ARS89032 >
Gates® Power Transmission Hi-Power® II A128 Banded Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 130 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
