Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/5VX850 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 85 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053288247
-
Manufacturer Part Number5/5VX850
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness35/64 in
-
MaterialEPDM
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section Size5VX
-
Series9389
-
Number of Ribs5
-
Outside Length85 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93895085
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/5VX850 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 85 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
SM SBHB03.0X02.0 Pipe Fitting
STAINLESS STEEL KEYSTOCK IS AN EXCELLENT ALTERNATIVE TO STEEL KEYSTOCK WHEN CORROSION RESISTANCE IS A CONCERN FREQUENTLY USED IN FOOD AND MARINE APPLICATIONS. MADE FROM 300 SERIES STAINLESS STEEL. MOST TOLERANCES ON SQUARE DIMENSIONS ARE UNDERSIZED, 300 STAINLESS STEEL, 1 FT LENGTH, 5/8" WIDTH, 5/8" HEIGHT, PLAIN, SQUARE
Polypropylene disposable clothing provides affordable, light weight protection against non-hazardous dry particulates like dirt. Good for use in pharmaceuticals, medical, law enforcement and laboratory.
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensures reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
F4B-SXR-75M Dodge® 125676 215 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 75 mm Dia Bore, 152.4 mm L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 196.9 mm OAL/Dia
F4B-SXR-75M Dodge® 125676 215 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 75 mm Dia Bore, 152.4 mm L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 196.9 mm OAL/Dia
