Gates® Power Transmission Super HC® PowerBand® 4/5V2240 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 224 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053278286
-
Manufacturer Part Number4/5V2240
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9386
-
Number of Ribs4
-
Outside Length224 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93864224
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 4/5V2240 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 224 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Jet® S90 series hand chain hoists were designed with reliability and durability to perform in light duty industrial applications. Easily maintained and serviced, the Jet® S90 is available in capacities from 1/2 ton to 10 ton and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). The Jet® S90 is the ideal contractor grade hoist.
Gates® Power Transmission Super HC® PowerBand® 2/3V375 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 37-1/2 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission Super HC® 5VX840 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 84 in L Outside, 35/64 in THK, EPDM
Finding a belt that fits into your compact machinery without sacrificing power or efficiency is a daily challenge. When every inch of space is precious and traditional belts just don't cut it, the Super HC Molded Notch (MN) V-belt is your solution. This bandless, high-performance belt, crafted from ethylene elastomer with precision-molded notches, provides superior cord support and flexibility to improve load distribution and reduce maintenance needs. Whether you aim to boost your drive efficiency or minimize downtime, Gates Super HC MN V-belts deliver the durability and performance to keep your industrial processes running smoothly.
3 -MALE PIPE THREADX6 GALVANIZED NIPPLE
Southwire - Topaz 1075 2-Piece Compression Conduit Expansion Coupling, 1-1/2 in, For Use With SCH 40/80 PVC Conduit, Type T Conduit Body, PVC
Topaz's Schedule 40 PVC Two Piece Expansion Couplings compensate for temperature-related length changes in exposed applications. Two piece, rugged and noncorrosive construction with lubricated seals provides easier movement; manufactured with a male terminator adapter end design. For use with both Schedule 40 and Schedule 80 PVC conduit; cULus approved in sizes from 1/2” to 4.”
