Gates® Power Transmission Super HC® Molded Notch PowerBand® 12/3VX450 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 45 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053767063
-
Manufacturer Part Number12/3VX450
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness21/64 in
-
MaterialEPDM
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter3.82 in
-
Section Size3VX
-
Series9388
-
Number of Ribs12
-
Outside Length45 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number938812045
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 12/3VX450 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 45 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Dremel® Edge Hog® 100 Carbide Burr, Ball Head, 1/4 in Dia Head, 1-1/2 in OAL
Dremel® Edge Hog® 100 Carbide Burr, Ball Head, 1/4 in Dia Head, 1-1/2 in OAL
BEARING ADAPTER METRIC LOCK WASHER - SNRMB9 >
Gates® Power Transmission Tri-Power® PowerBand® 2/BX58 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 61.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
HY-KO CDRF-3 Carded Reflector, 9.63 in L x 4.88 in W, Red, Plexiglas
Carlon® E987H Type-C Conduit Body, 1-1/2 in Hub, 32 cu-in Capacity, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
