Gates® Power Transmission Super HC® 3V315 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 31-1/2 in L Outside, 21/64 in THK, Chloroprene
Pioneered by Gates®, these "narrow" cross-sections can transmit up to three times the horsepower of the classical cross-sections (A, B, C and D) in the same amount of drive space.
-
BrandGates® Power Transmission
-
UPC072053267419
-
Manufacturer Part Number3V315
-
CountryUSA
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9332
-
Number of Ribs1
-
Outside Length31-1/2 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number93320315
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® 3V315 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 31-1/2 in L Outside, 21/64 in THK, Chloroprene
Pioneered by Gates®, these "narrow" cross-sections can transmit up to three times the horsepower of the classical cross-sections (A, B, C and D) in the same amount of drive space.
Gates® Power Transmission Metric-Power™ XPB1400 Heavy Duty Molded Notch V-Belt, XPB Section, 17 mm W Top, 1412 mm L Outside, 13 mm THK, EPDM
Manufactured in the Americas, these belts are made to Gates® high quality global production standards. Metric-Power™ belts are readily available for replacement on drives that require metric cross-sections.
Gates® Power Transmission Super HC® 5VX660 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 66 in L Outside, 35/64 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as transmitting more horsepower than the classical cross-sections in the same amount of drive space.
Gates® Power Transmission Super HC® 5VX580 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 58 in L Outside, 35/64 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as transmitting more horsepower than the classical cross-sections in the same amount of drive space.
Gates® Power Transmission Super HC® 3V475 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 47-1/2 in L Outside, 21/64 in THK, Chloroprene
Pioneered by Gates®, these "narrow" cross-sections can transmit up to three times the horsepower of the classical cross-sections (A, B, C and D) in the same amount of drive space.
Gates® Power Transmission Super HC® 5VX2000 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 200 in L Outside, 35/64 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as transmitting more horsepower than the classical cross-sections in the same amount of drive space.
