Gates® Power Transmission Micro-V® 290J5 Heavy Duty V-Belt, J Section, 3/32 in W Top, 29 in L Outside, 5/32 in THK, Polychloroprene Rubber
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053519563
-
Manufacturer Part Number290J5
-
CountryUSA
-
Temperature Range-30 to 180 deg F
-
Thickness5/32 in
-
MaterialPolychloroprene Rubber
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Section SizeJ
-
Series9171
-
Number of Ribs5
-
Outside Length29 in
- High modulus, low stretch tensile member for added strength and dependability
- Fiber reinforced ribs for excellent wear resistance
- Smooth running for minimal vibration at high speeds
-
Alternative Part Number917102905
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3 Standard
-
WarrantyLimited
-
Catalog
-
Service Manual
Recently Viewed
Gates® Power Transmission Micro-V® 290J5 Heavy Duty V-Belt, J Section, 3/32 in W Top, 29 in L Outside, 5/32 in THK, Polychloroprene Rubber
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 1221738 Minimum Plain Bore Type C1 Change Gear, 20 Diametral Pitch, 14.5 deg Pressure Angle, 3/8 in W Face, 25 Teeth, 1-1/4 in Dia Pitch, 5/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
5002-12-W HALLOWELL SHELVING/METAL PRODUCTS
SHELVING POST-HLW500212W>
ALE 10THHNYEL 10-THHN YELLOW STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNYEL >
Little Giant® 526003 NK-1 Small Direct Drive Oil Filled Submersible Pump, 210 gph Flow Rate, 1/4 in MNPT Outlet, 1/150 hp, Nylon
Little Giant® 526003 NK-1 Small Direct Drive Oil Filled Submersible Pump, 210 gph Flow Rate, 1/4 in MNPT Outlet, 1/150 hp, Nylon
ALAN 14-THHN YELLOW STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNYEL >
