Gates® Power Transmission Micro-V® 610J10 Heavy Duty V-Belt, J Section, 3/32 in W Top, 61 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053297843
-
Manufacturer Part Number610J10
-
CountryUSA
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs10
-
Outside Length61 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917106110
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Micro-V® 610J10 Heavy Duty V-Belt, J Section, 3/32 in W Top, 61 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Gates® Power Transmission Micro-V® 300J10 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
2"-MPT X 2-1/2" BLACK NIPPLES-JPW2X21/2BN>
Morse® Raider® Plus XJ0205 Standard Single Reduction Worm Gear Reducer, C-Face Quill Input, Shaft Output, 5.23 hp Input, 20:1 Gear, 87.5 rpm Maximum Output, 188.35 in-lb Input/87.5 in-lb Output Torque Rating
With a large variety of add on accessories, the Raider® Plus worm gear reducer is a problem solver. Four available styles make it the most flexible worm gear product in the drives and components portfolio. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors. The Raider Plus worm gear reducer product line features a center distance range from 1 to 6 in with ratios from 5:1 to 60:1. It also contains an output torque range from 200 to 10000 ft-lb. Additionally, the line is an industry leader due to its patented design technology and manufacturing techniques.
Gates® Power Transmission Micro-V® 500L10 Heavy Duty V-Belt, L Section, 3/16 in W Top, 50 in L Outside, 1/4 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 767885 VPE 200 Normal Duty Pillow Block Ball Bearing, 3/4 in Dia Bore, 3-25/64 to 4-11/64 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL x 2-17/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
