Gates® Power Transmission Micro-V® 580J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 58 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053294279
-
Manufacturer Part Number580J16
-
CountryUSA
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs16
-
Outside Length58 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917105816
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Micro-V® 580J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 58 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 767425 VPS 200 Normal Duty Pillow Block Ball Bearing, 2 in Dia Bore, 6-9/16 to 7-5/16 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8-13/16 in OAL x 4-31/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
10-AMP 500-VOLT MIDGET TD FUSES -EDIMEQ10 >
Browning® 1012285 Type 15 Web Multiple Sheave, 1.38 to 3.625 in Split Taper Bore, 9.8 in OD, 6 Grooves, 9.8 in Dia Pitch, 6-1/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
MORSE® 22589 1680 Taper Pin Reamer, #2 Taper Pin, 0.2008 in Dia Reamer, 0.1605 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22589 1680 Taper Pin Reamer, #2 Taper Pin, 0.2008 in Dia Reamer, 0.1605 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22594 1680 Taper Pin Reamer, #7 Taper Pin, 0.3297 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22594 1680 Taper Pin Reamer, #7 Taper Pin, 0.3297 in Dia Small End, Straight Flute, Straight Shank
