Gates® Power Transmission Polyflex® 7M1180 Light Duty V-Belt, 7M Section, 9/32 in W Top, 46.46 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053301670
-
Manufacturer Part Number7M1180
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness7/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width9/32 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter2.546 in
-
Section Size7M
-
Series8903
-
Number of Ribs1
-
Outside Length46.46 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89031180
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Polyflex® 7M1180 Light Duty V-Belt, 7M Section, 9/32 in W Top, 46.46 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
MCR Safety 61110 Engineer® Plus Dual Lens Safety Glasses With Side Shields, Duramass® Hard Coat, Clear Lens, Gold Metal, Polycarbonate Lens, ANSI Z87+
Loctite® Fixmaster® 235573 PC 9410™ Magna-Crete™ 2-Part Concrete Repair, 5 gal Kit, Clear/Dark Green/Gray, 24 hr Curing
1-1/8" X 9-1/4" LIFT ARM PIN-HIG03132 >
Bostitch® SB1030203/82.9 Stick Carton Staples, Adhesive Collation, Chisel Point, 1/2 in W Crown, 5/8 in L Leg, Galvanized Steel
Bostitch® SB1030203/82.9 Stick Carton Staples, Adhesive Collation, Chisel Point, 1/2 in W Crown, 5/8 in L Leg, Galvanized Steel
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
