Gates® Power Transmission Polyflex® 7M1120 Light Duty V-Belt, 7M Section, 9/32 in W Top, 44.09 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC072053301656
-
Manufacturer Part Number7M1120
-
CountryUSA
-
Temperature Range-65 to 180 deg F
-
Thickness7/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width9/32 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter2.546 in
-
Section Size7M
-
Series8903
-
Number of Ribs1
-
Outside Length44.09 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89031120
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Polyflex® 7M1120 Light Duty V-Belt, 7M Section, 9/32 in W Top, 44.09 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Dodge® 131839 207 Normal Duty Pillow Block Ball Bearing Unit, 1-3/8 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.
HCI Preferred Supplier 28151 Long Pipe Nipple, 3/8 in Nominal, 3 in L, Brass, NPTF End Style
HCI Preferred Supplier 28151 Long Pipe Nipple, 3/8 in Nominal, 3 in L, Brass, NPTF End Style
Dodge® 131340 211 Normal Duty Pillow Block Ball Bearing Unit, 2 in Dia Bore, 6.38 to 7.44 in L Bolt Center-to-Center, 2.44 in Base to Bore Centerline, 8.88 in OAL x 4.9 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.
Dodge® 131837 207 Normal Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
ROUND, ALMOND IN COLOR PHONE JACK MOUNTS TO DRYWALL OR A STANDARD ELECTRICAL BOX AND WILL ALLOW 1 OR 2" PHONE, FAXOR MODEM LINES.-JWH502111 >
