Gates® Power Transmission Polyflex® JB® 3/7M1360JB Joined Band Light Duty V-Belt, 7M Section, 9/32 in W Top, 53.3 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053263299
-
Manufacturer Part Number3/7M1360JB
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness7/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width9/32 in
-
Reinforced MaterialPolyester
-
TypeJoined Band Light Duty
-
Minimum Pulley Diameter2.546 in
-
Section Size7M
-
Series8913
-
Number of Ribs3
-
Outside Length53.3 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Joined belt construction provides high stability, preventing belts from turning over or coming off of the drive
-
Alternative Part Number89133136
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Polyflex® JB® 3/7M1360JB Joined Band Light Duty V-Belt, 7M Section, 9/32 in W Top, 53.3 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
The United Abrasives/SAIT C24N Concrete wheel is excellent for grinding masonry, concrete, stone and aggregate. The C24N wheel can be used on hard to grind metal like cast iron and carbide. This wheel features a soft bond for fast stock removal. Proudly manufactured in the USA.
Smith Bearing® CR-3/4-X Cylindrical Stud Type Needle Bearing Cam Follower, 3/4 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
Gates® Power Transmission Polyflex® 7M650 Light Duty V-Belt, 7M Section, 9/32 in W Top, 25.59 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission MegaCrimp™ 6G-6FP G25 Straight Hydraulic Coupling, 3/8 in x 3/8-18 Nominal, Hose x Female NPTF, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
TCM12202VH>

