Gates® Power Transmission Polyflex® JB® 3/7M750JB Joined Band Light Duty V-Belt, 7M Section, 9/32 in W Top, 29.3 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053263671
-
Manufacturer Part Number3/7M750JB
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness7/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width9/32 in
-
Reinforced MaterialPolyester
-
TypeJoined Band Light Duty
-
Minimum Pulley Diameter2.546 in
-
Section Size7M
-
Series8913
-
Number of Ribs3
-
Outside Length29.3 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Joined belt construction provides high stability, preventing belts from turning over or coming off of the drive
-
Alternative Part Number89133750
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Polyflex® JB® 3/7M750JB Joined Band Light Duty V-Belt, 7M Section, 9/32 in W Top, 29.3 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
United Abrasives-SAIT 1AX Blue Line™ 57906 Semi-Friable Coated Abrasive Belt, 4 in W x 24 in L, 100 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
United Abrasives-SAIT 1AX Blue Line™ 57505 Portable Semi-Friable Coated Abrasive Belt, 3 in W x 24 in L, 80 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
THE SUBMERSIBLE TRAILER LIGHT KIT IS AN INCADESCENT LIGHT KIT THAT FUNCTIONS AS STOP, TURN, TAILLIGHTS, AND A LICENSE PLATE LIGHT AND SHOULD BE USED FOR TOWING APPLICATIONS ON TRAILERS OVER/UNDER 80" WIDE. IT IS IDEAL FOR MULTIPLE STYLES OF TRAILERS WHERE INCANDESCENT LIGHTS ARE DESIRED AND IS SUBMERSIBLE AND WATERPROOF.
-JWH578182 >
FLASHLIGHT BULBS-GEAPR12 >
1" — 2" fittings pressure to 150 P.S.I. at 70°F.
3" fittings pressure to 125 P.S.I. at 70°F.
Easy On/Off hose connections.
Positive seals.
Quick &easy assembly.
