Gates® Power Transmission Polyflex® 5M800 Light Duty V-Belt, 5M Section, 3/16 in W Top, 31-1/2 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC072053290233
-
Manufacturer Part Number5M800
-
CountryUSA
-
Temperature Range-65 to 180 deg F
-
Thickness1/8 in
-
MaterialHigh Modulus Polyurethane
-
Top Width3/16 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter1.273 in
-
Section Size5M
-
Series8902
-
Number of Ribs1
-
Outside Length31-1/2 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89020800
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Polyflex® 5M800 Light Duty V-Belt, 5M Section, 3/16 in W Top, 31-1/2 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission Micro-V® 580J8 Heavy Duty V-Belt, J Section, 3/32 in W Top, 58 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Gates® Power Transmission Micro-V® 380J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 38 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Gates® Power Transmission Micro-V® 400J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 40 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 1012442 Type 15 Web Multiple Sheave, 1.38 to 3.625 in Split Taper Bore, 10.2 in OD, 7 Grooves, 10.2 in Dia Pitch, 7-1/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission Micro-V® 610J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 61 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
