Gates® Power Transmission Polyflex® 11M2120 Light Duty V-Belt, 11M Section, 7/16 in W Top, 83.46 in L Outside, 9/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053225181
-
Manufacturer Part Number11M2120
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness9/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width7/16 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size11M
-
Series8904
-
Number of Ribs1
-
Outside Length83.46 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89042120
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Polyflex® 11M2120 Light Duty V-Belt, 11M Section, 7/16 in W Top, 83.46 in L Outside, 9/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
MasterDrive L075-14MM L075 Standard Jaw Coupling, 14 mm Dia Bore, 0.82 in L Through Bore, 1.75 in Dia Hub, Powdered Metal
Jaw Couplings provide standard shaft-to-shaft connection for general duty applications. Two hubs are used in pair with an elastomer or bronze element (spider), each sold seperately. The element eliminates metal-to-metal contact and acts as a shock absorber. The design is fail-safe in that it will perform if the element fails.
YELLOW PLASTIC COAT CLOTH GLOVES
MCR Safety 1310S 1310 General Purpose Gloves, Gunn Cut/Wing Thumb Style, Cowhide Leather Palm, Gray, Gauntlet Cuff, Fleece Lining
MCR Safety 1310S 1310 General Purpose Gloves, Gunn Cut/Wing Thumb Style, Cowhide Leather Palm, Gray, Gauntlet Cuff, Fleece Lining
QT LATEX EXTERIOR GLOSS WHITE TINT BASE-BLP141610QT >
1-GAL POLYURETHANE SATIN FINISH-BLP7236GAL >
