Gates® Power Transmission Polyflex® 11M710 Light Duty V-Belt, 11M Section, 7/16 in W Top, 27.95 in L Outside, 9/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053225235
-
Manufacturer Part Number11M710
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness9/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width7/16 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size11M
-
Series8904
-
Number of Ribs1
-
Outside Length27.95 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89040710
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Polyflex® 11M710 Light Duty V-Belt, 11M Section, 7/16 in W Top, 27.95 in L Outside, 9/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
TAPERED ROLLER BEARING CONE - NTN33281>
2.500" X 3.150" X .250" RADIAL SHAFT, SINGLE LIP GREASE SEAL
OIL SEALS-1.260" X 2.284" X .315"-CHI12765>
Dodge® Tigear-2® 26S15L Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid A Shaft Output, 3.62 hp, 15:1 Gear, 117 rpm Maximum Output, 1708 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
1.299" X 1.732" X .310" OIL SEAL - CHI12810>
