Bando Duraflex GL® 4L780 Light Duty High Speed Drive V-Belt, 4L Section, 1/2 in W Top, 78 in L Outside, 0.31 in THK, Neoprene
Duraflex GL® V-belts are specifically designed for shorter center distance, high-speed fractional horsepower drives. Common applications include HVAC equipment and appliances.
-
BrandBando
-
UPC649717446123
-
Manufacturer Part Number4L780
-
CountryUSA
-
Thickness0.31 in
-
MaterialNeoprene
-
Top Width1/2 in
-
Reinforced MaterialPolyester
-
TypeLight Duty High Speed Drive
-
Minimum Pulley Diameter2-1/2 in
-
Section Size4L
-
Outside Length78 in
- Oil, heat and ozone resistant bias cut, rubber impregnated fabric cover protects inner components for long life
- High strength polyester tensile cords provide maximum fatigue and stress resistance
- The cords are positioned, supported and protected by the insulation section for uniform load distribution
- The special rubber compound in the body of the belt is formulated to flex around small sheaves and dissipate heat build up to extend belt life
- Meets RMA standards for oil and heat resistance and static conductivity
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA IP-23
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Bando Duraflex GL® 4L780 Light Duty High Speed Drive V-Belt, 4L Section, 1/2 in W Top, 78 in L Outside, 0.31 in THK, Neoprene
Duraflex GL® V-belts are specifically designed for shorter center distance, high-speed fractional horsepower drives. Common applications include HVAC equipment and appliances.
Bando Duraflex GL® 4L620 Light Duty High Speed Drive V-Belt, 4L Section, 1/2 in W Top, 62 in L Outside, 0.31 in THK, Neoprene
Duraflex GL® V-belts are specifically designed for shorter center distance, high-speed fractional horsepower drives. Common applications include HVAC equipment and appliances.
Guardair® 75LJ036AA Long John® Classic+® Safety Air Gun, Venturi Tip, 150 psi Working, 36 in L Tube, 1/4 in FNPT Thread, Aluminum/Zinc Alloy
The perfect tool for cleaning inaccessible and hard-to-reach areas, Long John safety air guns are used for blowing floor debris, cleaning masonry forms, tanks, ovens, molds, and rafters, as well as machinery and storage areas. Efficient venturi nozzle boosts thrust up to 200% over conventional air guns, yet limits static pressure to less than 30 psi should the tip become blocked. Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort.
HCI Preferred Supplier 32363 Hose Tee, 3/4 in Nominal, Barb End Style, Brass
HCI Preferred Supplier 32098 Hose Splicer, 3/4 in Nominal, Barb End Style, Brass
Dixon® 178-1212 Hose Mender, 3/4 in Nominal, Barb End Style, Brass, Domestic
Legris by Dixon® 32045600 Equal Push-In Union Tee, 1/4 in Nominal, Tube, 290 psi Pressure, Brass, Domestic
Legris by Dixon® 32045600 Equal Push-In Union Tee, 1/4 in Nominal, Tube, 290 psi Pressure, Brass, Domestic
