Gates® Power Transmission Truflex® 4L220 Light Duty Banded V-Belt, 4L Section, 1/2 in W Top, 22 in L Outside, 5/16 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
-
BrandGates® Power Transmission
-
UPC72053002539
-
Manufacturer Part Number4L220
-
CountryUSA|Canada
-
Thickness5/16 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeLight Duty Banded
-
Minimum Pulley Diameter3.183 in
-
Section Size4L
-
Series8400
-
Number of Ribs1
-
Outside Length22 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Truflex® belts feature superior length stability for minimal take up requirements
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00697439 |
-
Alternative Part Number84002220|2220
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Truflex® 4L220 Light Duty Banded V-Belt, 4L Section, 1/2 in W Top, 22 in L Outside, 5/16 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
3/8" -HOSEX18-MM KOMATSU HOSE END-MHDE0618FK >
Dixon® M-0204060 Fitting Tubing Clamp
3/8" -HOSEX8-FEMALE JIC HYDRAULIC HOSE ENDS-MHDE0608FJ >
ALFAGOMMA® B-0608-MNPT B-0608 Hose Fitting, 3/8 in Hose, 1/2-14 Connection, Male NPTF End Style, 27.8 mm Cutoff Allowance, Import
Permatex® 80007 Form-A-Gasket® #1 Fast Dry Rigid Cure Gasket Sealant, 1.5 oz Tube
Permatex® Form-A-Gasket® No. 1 Sealant is a reddish brown, viscous paste with a characteristic alcoholic odor. It is a fast drying paste that changes to a hard, semi flexible seal through solvent evaporation. It seals flanges, fittings, connections and assembles against leakage. Improves gasket seal in permanent and rigid assemblies.
