Gates® Power Transmission Truflex® 3L390 Light Duty Banded V-Belt, 3L Section, 3/8 in W Top, 39 in L Outside, 7/32 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
-
BrandGates® Power Transmission
-
UPC072053001556
-
Manufacturer Part Number3L390
-
CountryUSA
-
Thickness7/32 in
-
MaterialEPDM
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeLight Duty Banded
-
Minimum Pulley Diameter2.546 in
-
Section Size3L
-
Series8400
-
Number of Ribs1
-
Outside Length39 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Truflex® belts feature superior length stability for minimal take up requirements
-
Alternative Part Number84001390
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Truflex® 3L390 Light Duty Banded V-Belt, 3L Section, 3/8 in W Top, 39 in L Outside, 7/32 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
Gates® Power Transmission Truflex® 3L270 Light Duty Banded V-Belt, 3L Section, 3/8 in W Top, 27 in L Outside, 7/32 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
Gates® Power Transmission PoweRated® 4L260K Light Duty Banded V-Belt, 4L Section, 1/2 in W Top, 26 in L Outside, 5/16 in THK, Chloroprene
These green belts are an alternative to conventional light-duty belts, with high performance construction delivering more horsepower, less stretch and providing longer service life. PoweRated® belts are suitable for outdoor power equipment, appliances and industrial applications where fractional horsepower (FHP) belts are typically used.
Gates® Power Transmission Truflex® 3L570 Light Duty Banded V-Belt, 3L Section, 3/8 in W Top, 57 in L Outside, 7/32 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
Gates® Power Transmission Truflex® 4L600 Light Duty Banded V-Belt, 4L Section, 1/2 in W Top, 60 in L Outside, 5/16 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
Gates® Power Transmission PoweRated® 4L270K Light Duty Banded V-Belt, 4L Section, 1/2 in W Top, 27 in L Outside, 5/16 in THK, Chloroprene
These green belts are an alternative to conventional light-duty belts, with high performance construction delivering more horsepower, less stretch and providing longer service life. PoweRated® belts are suitable for outdoor power equipment, appliances and industrial applications where fractional horsepower (FHP) belts are typically used.
