Gates® Power Transmission Truflex® 2L270 Light Duty Banded V-Belt, 2L Section, 1/4 in W Top, 27 in L Outside, 5/32 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
-
BrandGates® Power Transmission
-
UPC72053000597
-
Manufacturer Part Number2L270
-
CountryUSA|Canada
-
Thickness5/32 in
-
MaterialEPDM
-
Top Width1/4 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeLight Duty Banded
-
Minimum Pulley Diameter1.273 in
-
Section Size2L
-
Series8400
-
Number of Ribs1
-
Outside Length27 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Truflex® belts feature superior length stability for minimal take up requirements
-
Alternative Part Number84000270|270
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Truflex® 2L270 Light Duty Banded V-Belt, 2L Section, 1/4 in W Top, 27 in L Outside, 5/32 in THK, EPDM
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
All CPVC schedule 80 fittings shall be produced by Spears® Manufacturing Company from CPVC materials, cell classification 23447 conforming to ASTM Standard D 1784. All injection-molded fittings through 12 in shall be manufactured in compliance to ASTM F 439 and Certified by NSF® International for use with potable water service. All 14 in through 24 in and fabricated fittings shall be produced in accordance with Spears® Specifications. All CPVC flanges shall be designed and manufactured to meet CL150 bolt pattern per ANSI Standard B16.5.
2-1/2"-ID TAKE-UP BEARING UNIT - FYHUCT21340>
6-FOFS SWIVELX6-MALE JIC HYDRAULIC ADAPTER-DAYFS650466 >
POLY ELECTRIC FENCE WIRE--ROLL OF 1312'-JWH707112 >
1-1/2" -MALE PIPE THREAD HEX HYDRAULIC PLUG-DAY540624P >
