Classical Belts
Gates® Power Transmission A47 Hi-Power® II 9002 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 49 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission AX19 9012 V-Belt Belt, AX Section, 0.48 in W Top, 21 in L Outside, 0.35 in THK, EPDM
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
Gates® Power Transmission AX20 9012 V-Belt Belt, AX Section, 0.48 in W Top, 22 in L Outside, 0.35 in THK, EPDM
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
Gates® Power Transmission AX41 Tri-Power® 9012 Cogged Heavy Duty V-Belt, 1/2 in W Top, 43 in L Outside, 5/16 in THK, AX Section, EPDM
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
Gates® Power Transmission AX56 Tri-Power® 9012 Cogged Heavy Duty V-Belt, AX Section, 1/2 in W Top, 58 in L Outside, 5/16 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
Gates® Power Transmission BX64 Tri-Power® 9013 Cogged Heavy Duty V-Belt, 21/32 in W Top, 67 in L Outside, 13/32 in THK, BX Section, EPDM
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
Gates® Power Transmission Hi-Power® A24 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 26 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A26 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 28 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A27 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 29 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A28 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 30 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A30 Heavy Duty V-Belt, A Section, 1/2 in W Top, 32 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A31 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 33 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A33 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 35 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A35 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 37 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A38 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 40 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A43 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 45 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A45 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 47 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A48 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 50 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A49 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 51 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A52 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 54 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A53 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 55 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A55 Heavy Duty V-Belt, A Section, 1/2 in W Top, 57 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A58 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 60 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Gates® Power Transmission Hi-Power® A64 Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 66 in L Outside, 5/16 in THK, EPDM
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging.
Recently Viewed
Loctite® 1138284 5770™ 1-Part High Temperature Medium Strength Thread Sealant, 50 mL Tube, Off-White
Sealant paste designed for metal threaded pipes and fittings in industrial applications which is particularly suitable for sealing steel metal joints. Loctite® 5770 is an Off-White to purplish gray dimethacrylate ester acrylic sealant paste designed for locking and sealing metal threaded pipes and fittings in industrial applications. It prevents loosening and leakage from shock and vibration and is particularly suitable for sealing steel metal joints where high temperature and high pressure resistance is required.
MARXMAN™ 85073 330QI General Purpose Jobber Length Drill Bit, #19 Drill - Wire, 0.166 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 85073 330QI General Purpose Jobber Length Drill Bit, #19 Drill - Wire, 0.166 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Gates® Power Transmission Tri-Power® PowerBand® 2/BX136 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 139.6 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as transmitting more horsepower than the classical cross-sections in the same amount of drive space.
Milwaukee® Steel Hawg® 49-59-0625 Annular Cutter, 5/8 in Dia Cutter, 1 in D Cutting, HSS, Black Oxide, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Milwaukee® 49-59-2188 Annular Cutter, 1-7/8 in Dia Cutter, 2 in D Cutting, HSS, Black Oxide, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Milwaukee® 49-59-2138 Annular Cutter, 1-3/8 in Dia Cutter, 2 in D Cutting, HSS, Black Oxide, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
