Gates® Power Transmission PowerGrip® 490H100 Heavy Timing Belt, 1 in W, 49 in OAL, 1/2 in Pitch, 98 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566130
-
Manufacturer Part Number490H100
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width1 in
-
Series9257
-
Number of Teeth98
-
Overall Length49 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573234
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 490H100 Heavy Timing Belt, 1 in W, 49 in OAL, 1/2 in Pitch, 98 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 1100H300 Heavy Timing Belt, 3 in W, 110 in OAL, 1/2 in Pitch, 220 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-1/2" X 6" THREADED TAILPIECE-JWH403986 >
16" X 16" X 2" PLEATED AIR FILTER
Browning® 1031715 AK Series Type 1 FHP Sheave With 3/16 x 3/32 in Keyway, 5/8 in Finished Bore, 2-1/4 in OD, 2 Grooves, 2.2 in (A)/1.66 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Milwaukee XL CUT-LEV-3 NITRILE GLOVES MWK 48-22-8973
The MILWAUKEE® XL Impact Cut Level 3 Nitrile Gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 3 Rated. These nitrile coated gloves have impact rated enhanced TPR added to the back of the hand for added protection. The dipped gloves have a reinforced nitrile coating between the thumb and index finger for enhanced durability in high wear points. They are 18 gauge for high dexterity when handling small objects and have SMARTSWIPE™ touchscreen compatible fingertips to access devices without taking off gloves.
