Gates® Power Transmission PowerGrip® Twin Power® TP480H300 Heavy Timing Belt, 3 in W, 48 in OAL, 1/2 in Pitch, 96 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053625363
-
Manufacturer Part NumberTP480H300
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.77 in
-
Width3 in
-
Series9246
-
Number of Teeth96
-
Overall Length48 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92463508
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP480H300 Heavy Timing Belt, 3 in W, 48 in OAL, 1/2 in Pitch, 96 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
8" 15 TINE POLY HEAD SHRUB RAKE-JWH712312 >
732161 DO-IT-BEST/BONIDE MOLEMAX 10LB GRANULAR ANIMAL REPELLENT
APPLY TO AREAS INFESTED WITH LAWN MOLES TO REPEL AND PREVENT ADDITIONAL DAMAGE. MADE WITH FAST DISPERSING CASTOR OIL. FAST-ACTING CASTOR OIL REPELS MOLES FROM TURF AREAS AND FROM PLANTING BEDS, REPEL MOLES, VOLES, GOPHERS, RABBITS, ARMADILLOS, SKUNKS AND MORE IN LAWNS, FLOWERBEDS, AND GARDENS
-JWH732161 >
FYH® UCFC208 40MM UCFC Cylindrical Flange Cartridge Unit, 40 mm Dia Bore, 4-23/32 in OD, 1.93 in W
FYH® UCFC208 40MM UCFC Cylindrical Flange Cartridge Unit, 40 mm Dia Bore, 4-23/32 in OD, 1.93 in W
HCI Preferred Supplier FF12M FF Series Pipe Plug, 3/8 x 1/2 in Nominal, FNPT, PTFE Seal/Steel
HCI Preferred Supplier FF12M FF Series Pipe Plug, 3/8 x 1/2 in Nominal, FNPT, PTFE Seal/Steel
Dodge® 124648 206 Intermediate Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-3/16 in Dia Bore, 3.56 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 4.44 in OAL/Dia
Dodge® 124648 206 Intermediate Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-3/16 in Dia Bore, 3.56 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 4.44 in OAL/Dia
