Gates® Power Transmission PowerGrip® Twin Power® TP330H100 Heavy Timing Belt, 1 in W, 33 in OAL, 1/2 in Pitch, 66 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC072053349870
-
Manufacturer Part NumberTP330H100
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.77 in
-
Width1 in
-
Series9246
-
Number of Teeth66
-
Overall Length33 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92463224
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP330H100 Heavy Timing Belt, 1 in W, 33 in OAL, 1/2 in Pitch, 66 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
1/2" X 3" STAINLESS STEEL NIPPLE 316-FIT1/2X3SSN316 >
Gates® Power Transmission PowerGrip® 900L050 Light Timing Belt, 1/2 in W, 90 in OAL, 3/8 in Pitch, 240 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
LFSXV-103 Dodge® 124590 206 Intermediate Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-3/16 in Dia Bore, 3.56 in L Bolt Center-to-Center, 3.56 in Dia Bolt Circle, 3-Bolt Base Flange Mount, 4.44 in OAL/Dia
Dodge® 124590 206 Intermediate Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-3/16 in Dia Bore, 3.56 in L Bolt Center-to-Center, 3.56 in Dia Bolt Circle, 3-Bolt Base Flange Mount, 4.44 in OAL/Dia
Gates® Power Transmission PowerGrip® 900H075 Heavy Timing Belt, 3/4 in W, 90 in OAL, 1/2 in Pitch, 180 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
JET® HD series beam clamps come in capacities from 1 to 5 tons and can accommodate a beam up to 12 in wide. Each JET® beam clamp jaw is designed to distribute the load away from the beam flange and adjusts easily for a wide range of standard H or I beams. Available up to 5 ton capacities, the HD series has a greater beam flange width for wider beams.
