Gates® Power Transmission PowerGrip® 240L075 Light Timing Belt, 3/4 in W, 24 in OAL, 3/8 in Pitch, 64 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053564549
-
Manufacturer Part Number240L075
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width3/4 in
-
Series9257
-
Number of Teeth64
-
Overall Length24 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572205
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 240L075 Light Timing Belt, 3/4 in W, 24 in OAL, 3/8 in Pitch, 64 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
HCI Preferred Supplier 24041612 Straight Connector, 3/4 in x 1-5/16-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 24041612 Straight Connector, 3/4 in x 1-5/16-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Permatex® 81913 Silicone Adhesive Sealant, 7.25 oz Tube, Clear, Acetoxy Silicone Rubber Base
Permatex® clear silicone adhesive sealant is a general purpose, single component, room temperature vulcanizing (RTV) adhesive/sealant compound, designed for the sealing of mechanical assemblies. Upon curing from the exposure to moisture in the air, this non-sagging paste forms a tough, flexible, waterproof seal of silicone rubber, which resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Conforms to MIL-A-46106B, Type I.
HCI Preferred Supplier 300003 Breather Vent, 3/8 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300003 Breather Vent, 3/8 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 650012 Swivel Nut Elbow, 1-1/16-12 Nominal, Male JIC Flare x Female JIC Flare, Steel
HCI Preferred Supplier 650012 Swivel Nut Elbow, 1-1/16-12 Nominal, Male JIC Flare x Female JIC Flare, Steel
