Gates® Power Transmission PowerGrip® 507XH300 Extra Heavy Timing Belt, 3 in W, 50-3/4 in OAL, 7/8 in Pitch, 58 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053174809
-
Manufacturer Part Number507XH300
-
CountryUSA|Canada
-
Pitch7/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeExtra Heavy
-
Minimum Pulley Diameter6.57 in
-
Width3 in
-
Series9257
-
Number of Teeth58
-
Overall Length50-3/4 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92574200
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 507XH300 Extra Heavy Timing Belt, 3 in W, 50-3/4 in OAL, 7/8 in Pitch, 58 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Bando Synchro-Link® P32-8M-30 Type B1F High Torque Flanged Timing Belt Pulley, QD® Bore, 3.156 in OD, 3.208 in Dia Pitch, 1-1/2 in W Face
Bando Synchro-Link® Timing Belt Pulleys are manufactured to exacting tolerances to assure total drive system compatibility. They are available in a complete range of sizes, types, configurations and materials to contribute to the efficiency, economy and performance of your drive.
HCI Preferred Supplier 28540 Industrial Interchange Pipe Coupler, 1/4 in Nominal, FNPT, Brass
HCI Preferred Supplier 28540 Industrial Interchange Pipe Coupler, 1/4 in Nominal, FNPT, Brass
1" TO 1-3/4" HI-TORQUE HOSE CLAMPS-MUR843175 >
1" -HOSEX16" FEMALE ORFS 2-WIRE-MHDE1616FF >
Browning® 1031772 AK Series Type 1 FHP Sheave, 7/8 in Finished Bore, 2.35 in OD, 2 Grooves, 2.3 in (A)/1.76 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
