Gates® Power Transmission PowerGrip® 116XL037 Extra Light Timing Belt, 3/8 in W, 11.6 in OAL, 0.2 in Pitch, 58 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053703634
-
Manufacturer Part Number116XL037
-
CountryUSA|Canada
-
Pitch0.2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeExtra Light
-
Minimum Pulley Diameter0.62 in
-
Width3/8 in
-
Series9257
-
Number of Teeth58
-
Overall Length11.6 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92571366
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 116XL037 Extra Light Timing Belt, 3/8 in W, 11.6 in OAL, 0.2 in Pitch, 58 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
PIP® 302-0750-OR/S High Visibility Surveyors Vest, S, Hi-Viz Orange, Polyester Mesh, Zipper Closure, 10 Pockets, ANSI Class: Class 2, ANSI 107 Class 2 Type R2
Ideal for construction, municipalities, shipyards, and anywhere hi-visibility apparel is necessary.
Gates® Power Transmission Super HC® PowerBand® 3/3V630 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 63 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
MasterDrive H11/16-STL H Series Double Split Tapered Bushing, 11/16 in Dia Bore, 1-5/8 in Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Steel
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
1-1/2" OR 1-1/4" X 1-1/2" SINK PVC J-BENDS WITH NUTS AND WASHERS INCLUDED-JWH410399 >
1/2" -ID STEAM HOSE (FT)-DAY7250501 >
