Gates® Power Transmission PowerGrip® 110XL037 Extra Light Timing Belt, 3/8 in W, 11 in OAL, 0.2 in Pitch, 55 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053563184
-
Manufacturer Part Number110XL037
-
CountryUSA|Canada
-
Pitch0.2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeExtra Light
-
Minimum Pulley Diameter0.62 in
-
Width3/8 in
-
Series9257
-
Number of Teeth55
-
Overall Length11 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92571305
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 110XL037 Extra Light Timing Belt, 3/8 in W, 11 in OAL, 0.2 in Pitch, 55 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Browning® 1033307 BK Series Type 1 FHP Sheave, 7/8 in Finished Bore, 3.55 in OD, 2 Grooves, 3 in (A)/3-1/2 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission PowerGrip® Twin Power® TP150L100 Light Timing Belt, 1 in W, 15 in OAL, 3/8 in Pitch, 40 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
HCI Preferred Supplier 28585 ARO 210 Interchange Pipe Coupler, 3/8 in Nominal, FNPT, Brass
HCI Preferred Supplier 28585 ARO 210 Interchange Pipe Coupler, 3/8 in Nominal, FNPT, Brass
Gates® Power Transmission PowerGrip® 160XL025 Extra Light Timing Belt, 1/4 in W, 16 in OAL, 0.2 in Pitch, 80 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
2-13/16" -3-3/4" CC-52 HOSE CLAMPS-MURGS52 >
