Gates® Power Transmission PowerGrip® 1700H300 Heavy Timing Belt, 3 in W, 170 in OAL, 1/2 in Pitch, 340 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053567465
-
Manufacturer Part Number1700H300
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width3 in
-
Series9257
-
Number of Teeth340
-
Overall Length170 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573524
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 1700H300 Heavy Timing Belt, 3 in W, 170 in OAL, 1/2 in Pitch, 340 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
6-1/4" CAT # 7336 ALUMINUM FILTERS-AAF316011002>
Browning® Classical Gripbelt® 1028182 BK Series Type 2 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 3-3/4 in OD, 3.2 in (A)/3.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028182 BK Series Type 2 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 3-3/4 in OD, 3.2 in (A)/3.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028018 BK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3.15 in OD, 2.6 in (A)/3.1 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1028018 BK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3.15 in OD, 2.6 in (A)/3.1 in (B) Dia Pitch, 13/16 in W Face
20" X 24X1" PLEATED AIR FILTER
Browning® Classical Gripbelt® 1027994 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 3.15 in OD, 2.6 in (A)/3.1 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027994 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 3.15 in OD, 2.6 in (A)/3.1 in (B) Dia Pitch, 13/16 in W Face
