Gates® Power Transmission PowerGrip® 124L050 Light Timing Belt, 1/2 in W, 12.38 in OAL, 3/8 in Pitch, 33 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053296594
-
Manufacturer Part Number124L050
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width1/2 in
-
Series9257
-
Number of Teeth33
-
Overall Length12.38 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572100
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 124L050 Light Timing Belt, 1/2 in W, 12.38 in OAL, 3/8 in Pitch, 33 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 1400H150 Heavy Timing Belt, 1-1/2 in W, 140 in OAL, 1/2 in Pitch, 280 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Browning® 767865 VF2S 100 Intermediate Duty Non-Expansion Flange Mount Ball Bearing Unit, 1-15/16 in Dia Bore, 6-3/16 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 4-9/16 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® Classical Gripbelt® 1026137 AK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.8 in OD, 2.8 in (A)/2.26 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1026137 AK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.8 in OD, 2.8 in (A)/2.26 in (3L) Dia Pitch, 21/32 in W Face
3/4-HP, TEFC, 180-VDC, 1750-RPM, 56-C MOTOR - USMG642 >
7/8"-ID NEEDLE BEARINGS -TORHJ142212 >
