Gates® Power Transmission PowerGrip® Twin Power® TP1100H100 Heavy Timing Belt, 1 in W, 110 in OAL, 1/2 in Pitch, 220 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053624687
-
Manufacturer Part NumberTP1100H100
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.77 in
-
Width1 in
-
Series9246
-
Number of Teeth220
-
Overall Length110 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92463221
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP1100H100 Heavy Timing Belt, 1 in W, 110 in OAL, 1/2 in Pitch, 220 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
Lasco® 837-247 Flush, 2 x 1/2 in nominal, Spigot x Slip end style, SCH 80/XH, PVC, Domestic
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
3/4" -MALE PIPE THREADX6" 316" STAINLESS STEEL NIPPLE-FIT3/4X6SSN316 >
3/4" -ID HIGH PILLOW BLOCK UNIT-FYHEBP20412 >
Browning® Classical Gripbelt® 1027424 AK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 10-1/4 in OD, 10.2 in (A)/9.66 in (3L) Dia Pitch, 3/4 in W Face
Gates® Power Transmission PowerGrip® 560XH200 Extra Heavy Timing Belt, 2 in W, 56 in OAL, 7/8 in Pitch, 64 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
