Gates® Power Transmission PowerGrip® 900H075 Heavy Timing Belt, 3/4 in W, 90 in OAL, 1/2 in Pitch, 180 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053565614
-
Manufacturer Part Number900H075
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width3/4 in
-
Series9257
-
Number of Teeth180
-
Overall Length90 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573119
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 900H075 Heavy Timing Belt, 3/4 in W, 90 in OAL, 1/2 in Pitch, 180 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
JET® HD series beam clamps come in capacities from 1 to 5 tons and can accommodate a beam up to 12 in wide. Each JET® beam clamp jaw is designed to distribute the load away from the beam flange and adjusts easily for a wide range of standard H or I beams. Available up to 5 ton capacities, the HD series has a greater beam flange width for wider beams.
3/4" -FEMALE PIPE THREAD STAINLESS STEEL UNIONS-FIT3/4SSU >
Appleton® UNILETS™ TB150A Type TB Conduit Outlet Body, 1-1/2 in Hub, Form 85, 34.5 cu-in, Pressure Cast Aluminum, Epoxy Powder Coated
Appleton® Form 85™ UNILETS™ Conduit Outlet Bodies, Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.
1/2-MPT X 11 SCHEDULE-80 STAINLESS STEEL NIPPLE - FIT1/2X11XHSSN>
1/2-MPT X 11 SCHEDULE-80 STAINLESS STEEL NIPPLE - FIT1/2X11XHSSN>
Gates® Power Transmission PowerGrip® 960H300 Heavy Timing Belt, 3 in W, 96 in OAL, 1/2 in Pitch, 192 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
