Gates® Power Transmission PowerGrip® 850H300 Heavy Timing Belt, 3 in W, 85 in OAL, 1/2 in Pitch, 170 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053567403
-
Manufacturer Part Number850H300
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width3 in
-
Series9257
-
Number of Teeth170
-
Overall Length85 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573518
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 850H300 Heavy Timing Belt, 3 in W, 85 in OAL, 1/2 in Pitch, 170 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Browning® Classical Gripbelt® 1026533 AK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 4.45 in OD, 4.4 in (A)/3.86 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1026533 AK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 4.45 in OD, 4.4 in (A)/3.86 in (3L) Dia Pitch, 3/4 in W Face
20" X 20" X 2" AIR FILTER
MUFFLER-MED524775 >
1-7/16" TAPPED BASE PILLOW BLOCK-FYHUCPAN20723 >
Gates® Power Transmission PowerGrip® 340H100 Heavy Timing Belt, 1 in W, 34 in OAL, 1/2 in Pitch, 68 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
