Gates® Power Transmission PowerGrip® Twin Power® TP800H100 Heavy Timing Belt, 1 in W, 80 in OAL, 1/2 in Pitch, 160 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053624649
-
Manufacturer Part NumberTP800H100
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.77 in
-
Width1 in
-
Series9246
-
Number of Teeth160
-
Overall Length80 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92463217
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP800H100 Heavy Timing Belt, 1 in W, 80 in OAL, 1/2 in Pitch, 160 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
12" X 25" X 1" AIR FILTER
1/2" -HOSEX#10 MALE FLAT FACE-MHDE0810MF >
BRASS WALL TUBE; 22 GAUGE, MEASURING 1-1/2" X 7"-JWH417490 >
1/2-HP, TEFC, 1-PH, 115/208-230-V, 3600-RPM, 56 MOTOR - USMT12CM1J >
10:1 GEAR REDUCER-BRW133ULR10 >
