Gates® Power Transmission PowerGrip® 780H150 Heavy Timing Belt, 1-1/2 in W, 78 in OAL, 1/2 in Pitch, 156 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566680
-
Manufacturer Part Number780H150
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width1-1/2 in
-
Series9257
-
Number of Teeth156
-
Overall Length78 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573339
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 780H150 Heavy Timing Belt, 1-1/2 in W, 78 in OAL, 1/2 in Pitch, 156 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
25" X 25" X 2" PLEATED AIR FILTER
HCI Preferred Supplier 44251LF Imperial Pipe Tee, 1/4 in Nominal, MNPT End Style, Bronze
HCI Preferred Supplier 44251LF Imperial Pipe Tee, 1/4 in Nominal, MNPT End Style, Bronze
Browning® Classical Gripbelt® 1028455 BK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 4.95 in OD, 4.4 in (A)/4.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028455 BK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 4.95 in OD, 4.4 in (A)/4.9 in (B) Dia Pitch, 7/8 in W Face
F4B-SXR-110 Dodge® 131120 209 Series Normal Duty Non-Expansion Ball Bearing Unit, 1-5/8 in Dia Bore, 4.13 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.38 in OAL/Dia
F4B-SXR-110 Dodge® 131120 209 Series Normal Duty Non-Expansion Ball Bearing Unit, 1-5/8 in Dia Bore, 4.13 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.38 in OAL/Dia
Browning® Classical Gripbelt® 1026640 AK Series Type 3 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 4.95 in OD, 4.9 in (A)/4.36 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1026640 AK Series Type 3 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 4.95 in OD, 4.9 in (A)/4.36 in (3L) Dia Pitch, 3/4 in W Face
