Gates® Power Transmission PowerGrip® 700H200 Heavy Timing Belt, 2 in W, 70 in OAL, 1/2 in Pitch, 140 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566895
-
Manufacturer Part Number700H200
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width2 in
-
Series9257
-
Number of Teeth140
-
Overall Length70 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573415
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 700H200 Heavy Timing Belt, 2 in W, 70 in OAL, 1/2 in Pitch, 140 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-1/4" -ID NICKEL PLATED PILLOW BLOCK-FYHUCPAN20720NP >
5/16" -7/8" SC-06" HOSE CLAMPS-MURGS5 >
Gates® Power Transmission PowerGrip® 1100H200 Heavy Timing Belt, 2 in W, 110 in OAL, 1/2 in Pitch, 220 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Lasco® 406-168 Reducing Elbow, 1-1/4 x 1 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
LF-GT-104 Dodge® 136352 207 Normal Duty Non-Expansion Ball Bearing Unit With Square Bolt Holes, 1-1/4 in Dia Bore, 3.94 in Dia Bolt Circle, 3-Bolt Base Flange Mount, 4.81 in OAL/Dia
The Dodge® Grip-Tight® mounted ball bearing is the maintenance-friendly solution for all of your ball bearing application needs, capable of performing critical functions in many operations. Grip-Tight® mounted ball bearings offer a unique method of shaft attachment via a thin wall tapered adapter sleeve and locknut design. Because of this system, bearing assemblies may be installed and removed from a shaft easily. 360 deg of concentric grip on the shaft for the entire length-through-bore of the bearing means Grip-Tight® provides a tight press fit with no shaft damage, even on commercial grade shafting.
