Gates® Power Transmission PowerGrip® Twin Power® TP660H200 Heavy Timing Belt, 2 in W, 66 in OAL, 1/2 in Pitch, 132 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053625158
-
Manufacturer Part NumberTP660H200
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.77 in
-
Width2 in
-
Series9246
-
Number of Teeth132
-
Overall Length66 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92463414
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP660H200 Heavy Timing Belt, 2 in W, 66 in OAL, 1/2 in Pitch, 132 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
HCI Preferred Supplier 28105 Hex Head Bushing, 1/2 x 1/8 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28105 Hex Head Bushing, 1/2 x 1/8 in Nominal, MNPT x FNPT End Style, Brass
F4B-SXR-111 Dodge® 131121 209 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-11/16 in Dia Bore, 4.13 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.38 in OAL/Dia
F4B-SXR-111 Dodge® 131121 209 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-11/16 in Dia Bore, 4.13 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.38 in OAL/Dia
F4B-SXR-107 Dodge® 131116 207 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 3.63 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 4-3/4 in OAL/Dia
F4B-SXR-107 Dodge® 131116 207 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 3.63 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 4-3/4 in OAL/Dia
Bando Synchro-Link® 394L075G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 3/4 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Browning® 767771 VF2E 100 Intermediate Duty Non-Expansion Flange Mount Ball Bearing Unit, 15/16 in Dia Bore, 3-57/64 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 2-3/4 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
